The Allerton Raw Sewage Pump Station
The Allerton Raw Sewage Pump Station is recommended for applications where gravity flow is not available to the main sewer and for one or more properties. Contact Allerton for sizing information.
Why use our Raw Sewage Pump Station?
- The pump chambers are manufactured from high quality glass reinforced plastic and in accordance with our BS EN ISO9001:2000 quality management system.
- Single phase and three phase pumps available.
- High-level alarm included.
- The Allerton Raw Sewage Pump Station is delivered complete with the pipework and valves pre-assembled in the tank, ready for immediate installation into the ground.
- 1 year warranty on all working parts.
- Low maintenance costs, servicing once a year.
- Custom made sewage pumping stations available upon request.
- Pump Station Servicing and Maintenance, Installation and Commissioning service available by our highly trained engineers.
How our Sewage Pump Station works
See illustration below.¹
- Galvanised Access Cover
- GRP Tank
- Inlet Pipe
- High Level Alarm Float
- Control Panel
- Quick Release Coupling
- Isolation Valve
- Non Return Valve
- Submerged Pump with Integral Float
As the level of the liquid rises in the chamber the integral float on the pump is activated, the pump starts and pumps the liquid out of the chamber until the pump float drops and the pump turns off.
The level of the liquid will again rise and the above sequence is repeated.
If the pump fails to pump, the liquid level will rise to activate the high level float and the high level alarm light will be illuminated.
For applications involving more than one dwelling we would recommend our dual raw sewage pump station.
Dimensions (mm)
|
