Allerton High Specification Pump Station
Need a raw sewage pump station but building regulations require you to have very specific needs? Allerton can help. Our high specification dual raw sewage pump station can accommodate any special requirements you have!
High Specification Dual Raw Sewage Pump Station
These pumps recommended when gravity flow alone is not possible to move raw sewage to a treatment plant, septic tank, or mains drainage. The High Specification Dual Raw Sewage Pump Station can accommodate large facilities which might have specific requirements for the type of pump used.
High Specification Dual Raw Sewage Pump Station
These pumps recommended when gravity flow alone is not possible to move raw sewage to a treatment plant, septic tank, or mains drainage. The High Specification Dual Raw Sewage Pump Station can accommodate large facilities which might have specific requirements for the type of pump used.
What are our customers saying?
We are one of the most highly reviewed UK company in off-mains drainage. Read our more than 65 positive reviews.
Why Use Our High Specification Pump Station?
Pump chambers are manufactured from high quality Glass Reinforced Plastic and in accordance with our BS EN ISO9001:2000 quality management system.
High-level alarm included.
The Allerton High Specification Pump Station is delivered complete with the pipework and valves pre-assembled in the tank, ready for immediate installation into the ground.
Fully automatic autochangeover control system to ensure equal wear and tear on each pump.
1 year warranty on all working parts.
Low maintenance costs, servicing once a year.
Custom made high specification pumping stations available upon request.
Wide range of diameters and depths of tanks available to satisfy the storage requirements in part H of the Building Regs.
Pump Station Servicing and Maintenance, Installation and Commissioning service available by our highly trained engineers.
How Our High Specification Pump Station Works
As the level of the liquid rises in the chamber the first two level floats, the stop and duty start floats are activated and the duty pump starts and pumps the liquid out of the chamber until the stop float drops and turns the pump off. The level of the liquid will again rise and due to the autochangeover control system the other pump will start. This ensures that the two pumps do an equal amount of work.
If the liquid level reaches the height of the second level float and the pump fails to pump, the level of liquid will continue to rise until the third float is activated and calls the standby pump to start. This pump will then start and pump until the stop float drops. If both pumps fail to pump, the liquid level will rise to the fourth float and the high level alarm will be activated.
Allerton High Specification Pumping Stations are made to suit your unique needs and can be adjusted to any inlet depth.
Galvanised Access Cover
GRP Tank
Inlet Pipe
Level Float Controls
Control Panel
Galvanised Guard Rail
Isolation Valve
Non Return Valve
Submersible Pumps
Dimensions (mm)
|
Storage Capacity Population Equivalent
|
0
|
5
|
12
|
20
|
27
|
44
|
|---|---|---|---|---|---|---|
|
(A) Inlet
|
500
|
1000
|
1000
|
500
|
1000
|
500
|
|
(B ) Below Inlet
|
900
|
1400
|
2500
|
3000
|
2000
|
3000
|
|
(C) Height
|
1400
|
2400
|
3000
|
3500
|
3000
|
3500
|
|
(D) Diameter
|
1000
|
1000
|
1200
|
1200
|
1800
|
1800
|
|
(E) Outlet
|
350
|
350
|
350
|
350
|
350
|
350
|
All our pump stations can be made to any depth.
About The Population Equivalent
At Allerton we use a calculation for all of our pump stations which is based on British Water guidelines to determine the appropriate size of the unit for the property. The calculation is known as the Population Equivalent (Pe) and it is a rating system that allows information to be comparable between different makes and models of units.
Please visit our Pump Stations Directory for alternative pumping stations.
Allerton reserves the right to alter the Allerton High Specification Pump Station specifications and dimensions without notice.
Why Allerton?
Qualified
Having Allerton install your pump station means you'll have a quality product that is installed correctly. We are specialists in off-mains drainage and have 50 years of experience and are knowledgeable in installing and servicing all makes/types of pump station.
Value for Money
We offer a free initial on-site consultation for installations within a reasonable distance from Sleaford. We keep our customers in mind when it comes to pricing. We have saved our customers hundreds of pounds over the years by our considered overview. We can do the same for you! Speak to us for a quote!
Friendly
From the office staff to the engineers in the field we are extremely friendly and have received great reviews to prove it. You know you're in good hands with Allerton.
Ready to arrange an appointment?
Contact our office to arrange a visit. Don’t hesitate to talk to us if you have any questions or concerns.
The Allerton High Specification Dual Raw Sewage Pump StationThe Allerton High Specification Dual Raw Sewage Pump Station is recommended where gravity flow is not available to the main sewer and for one or more properties. Contact Allerton for sizing information. Why use our High Specification Pump Station?
How our High Specification Pump Station worksSee illustration below.¹ |
| STORAGE | ||||||
| CAPACITY / P/E* | 0 | 5 | 12 | 20 | 27 | 44 |
| (A) INLET | 500 | 1000 | 1000 | 500 | 1000 | 500 |
| (B) BELOW INLET | 900 | 1400 | 2000 | 3000 | 2000 | 3000 |
| (C) HEIGHT | 1400 | 2400 | 3000 | 3500 | 3000 | 3500 |
| (D) DIAMETER | 1000 | 1000 | 1200 | 1200 | 1800 | 1800 |
| (E) OUTLET | 350 | 350 | 350 | 350 | 350 | 350 |
| *Population Equivalent | ||||||
Download our High Specification Pump Station Specification
Alternative pumping stations
Servicing and Maintenance
Allerton reserves the right to alter the Allerton High Spec Dual Raw Sewage Pumping Station specifications and dimensions without notice.
|
